WEBSITE: CONTACT US: info@zheruisteel.com
Many steel plate manufacturers sell steel plates at the same time that the factory usually is equipped with a machine to cut the flat steel plate business. This is a technical problem and requires personnel with relevant experience to operate it. Let me introduce you to the time of operation. What issues need attention and precautions.
1. Before applying slitting, pay attention to wearing safety protective equipment. The next thing to note is that you will pay attention to check whether there is any dirt in the machine equipment manufacturer. If it is necessary to eliminate neatness, when the slitting machine is in operation, it cannot place all the objects in its rotating position. Especially in the case of flammable and explosive products, in addition to this, you should also check whether the amount of oil in the e-mail box is normal, see if the oil has not been operating for a long time, and there is deterioration. Remember to check the place where the lubricant should be added to the machine. Add to prevent damage due to friction at the time of specific application.
2. Inspect the pressure regulating valve, pipeline, wound and its spindle bearings for damage and cracks, check whether the anchor bolts will loosen, and the electrical equipment road is not worn, to ensure that the electrical equipment box is not prone to abnormal smells and abnormalities. Happening.
3. At the time of the actual operation of slitting and cutting, pay attention to whether the cold water circulation system can work normally. In the future, you should pay attention to confirm that after the indicator light flashes, start the motor and let it run for 30 seconds to 1 minute. Check whether the motor can run normally, and there are noises.
4. At last, pay attention to the jog operation and close the tool holder. At this moment, you should also pay attention to check the mating condition of the knife edge and the tightening condition of the anchor bolts, and then press the material. For the slitting machine equipment, the selection is continuous or is an actual operation. At this moment, you need to press and hold the cutting power switch to carry out the actual cutting operation.
The operations that need to be paid attention to when these steel plates are flattened or sheared are the common experience of Master Wang. They are especially important in the work. After being familiar with these, not only can prevent hidden dangers but also improve efficiency. Zherui Steel is a one-stop steel plate manufacturer for steel plate sales, processing and transportation. For more related quality, please pay attention to Zherui Steel.
0 Comments