FIMI X8 Gimbal Horizon level check with FW Gimbal 1018B Aug 5

It was very clear morning to see ocean horizon line.
Did gimbal horizon level test together with the comparison of the video quality of 1080P 30FPS and 60FPS.
Unfortunately forgot to switch on 30FPS recording. So only X8 cam video of 60FPS is available which to be uploaded later.

Did several slow yaw turn and quick yaw turn and most of time, kept horizon level, except very last quick yaw turn which observed sight tilt.

FPV screen video timeline is;

2sec Preflight check
11sec Firmware update – FC 1055I
24sec Video setting 1080P 30FPS
40sec 1st take off – Forgot to record video
1min15sec Slow left yaw turn to check gimbal horizon level
1min45sec To check horizon level – seems O.K.
1min58sec Slow right yaw turn
2min32sec To check horizon level – seems O.K.
2min36sec Quick left yaw turn
2min41sec To check horizon level – seems O.K.
2min43sec Quick right yaw turn
2min50sec To check horizon level – seems O.K.
2min57sec Auto RTH
3min37sec Landing pad detected at 6.6m H
4min1sec Landed on the pad
4min13sec Video setting to 1080P 60FPS
4min33sec Start video recording
4min40sec 2nd take off
5min15sec To check horizon level – seems O.K.
5min16sec slow left yaw turn
5min30sec Slow right yaw turn
5min43sec Quick left yaw turn
5min50sec To check horizon level – Slight tilt observed
5min58sec Auto RTH
6min32sec landing pad detected at 5.1m H
5min57sec Just missed landing pad – probably pushed by wind

1018B